It’s an upgraded version with slightly more airflow based on tests that have translated into better carpet pickup.
This robot has a similar 3D sensor on the front as the L10 Pro, with Better ability to avoid obstacles From the brands that use the front camera. It is identical to Ecovacs N8 Pro + but with a larger bag; Hence, longer intervals between replacement.
Excellent obstacle avoidance with automatic unloading berth
Dreame Z10 Pro Review
Less than a year after Dreame Released L10 ProThe Z10 Pro comes with the same front laser sensors, but this time With empty berth automatically.
DreameTech claims that this bot has Up to 4000Pa of suction – One of the loudest robot vacuum cleaner I’ve tested. Air flow tests reveal its presence Just over 19 CFMis not the highest, but the upper level of the robotic vacuum cleaners.
Even with light airflow over the L10 Pro, the Z10 cleans carpets better, thanks to a redesigned combo brush.
* If you click on this link and make a purchase, we earn a commission at no additional cost to you.
Positives
- Excellent obstacle avoidance
- Improved cleaning performance on Dreame L10 Pro
- Decent for deep carpet cleaning
- Large capacity dock bag
- Navigation is mastered due to LIDAR
- Compatible with Xiaomi Home App, so expect a great app experience
- Above average scanning performance
- Self-discharge feature
Negatives
- Produces undercoating with rubber flaps blocking the debris path towards the main brush
- The port design may need some improvements and a better seal.
Table of Contents
Introduction to Dreame Z10 Pro
One of the new brands making a big entry into the robot vacuum space is DreameTech. I have reviewed two of their products before, D9 And the L10 Pro, and the Z10 Pro is their latest offering to date.
It’s the first with a self-discharge feature, something that more and more brands are integrating.
This variant retains the front 3D laser sensors for obstacle avoidance and, after extensive testing, is one of the best in the business.
empty auto dock
The most significant upgrade with the Z10 Pro is the self-discharge feature with an automatic discharge dock.
Like other big brands, it has a ramp shaped berth where the robot sits. And if you’ve followed my blog, you’ll know I like this design for its durability.
There are no alignment issues to worry about, and they can be used on carpet or hard floors.
You will notice that there are two ports, but only one of them works. The other connects to a second port and acts as a release valve, so air flows smoothly.
These ports connect to the underside of the robot’s dustbin. And frankly, I’m not a big fan of the design because it lacks a seal and opens easily, so debris can fall out if you tilt the container.
It was as good at vacuuming debris as dust, but struggles with vacuuming up long hair.
3D front laser sensors
I have reviewed other brands with front cameras (Ecovacs T8 and Roborock S6 MaxV) claim to avoid obstacles, but the Z10 Pro’s 3D laser sensors are outdone by both.
The laser outperforms the camera in this aspect, providing better accuracy in avoiding small objects.
I’ve done extensive testing with different things like wires, toys, shoes, slippers and even fake pipe – I’ve avoided most of these very well.
But there are limits. You won’t avoid games of a small size, or extended thin wires.
While it can avoid pet poo, I wouldn’t rely entirely on the 3D laser entirely because the side brush could touch it.
4000 Pa suction
DreameTech claims that this variant has a suction of 4000Pa, which is one of the top brands to disclose in this case.
I use an anemometer for all robot vacuums I review, which measure airflow. Z10 Pro Max 19.33 CFM. Not the highest, but it’s almost on par with the Roomba 980 and a touch more than the Dreame L10 Pro.
2 in 1 function
Like the previous model, the Z10 Pro also has a sweep feature to complement the improved sweeping performance.
Uses the same rear-mounted electronic water tank (150ml capacity) for cleaning floors.
The presence of an electronically controlled water tank It means better accuracy Where users can control the flow of water through the application.
Unlike gravity tanks, where water continually seeps through the pad, the electronic tank only allows water to flow if the vacuum is turned on.
Scanning performance is surprisingly good, not as good as S5 Max or S7but Fit enough for light tasks.
Trash container design and capacity
Z10 Pro keeps the same top-mounted trash can but with an accessory Less capacity 400ml (L10 Pro has a volume of 570ml).
but the Self-discharge feature Compensate for small capacity 4 liter bag capacity What Dreame says Can hold up to 65 days of debris.
One of the reasons for the decrease in volume is these ports on the bottom that taper up. It’s what the base station uses to pick up debris when it’s in automatic dump mode.
Design
Dreame Z10 Pro retains the same round frame and design. There is not much difference between the L10 Pro and the Z10 Pro with the button layout, design and brush configuration.
she has LIDAR is fixed to the top and three buttons With a top door that contains a trash can.
Underneath, it retains the same single brush structure and group brush structure.
Behind the brush there is an opening for the water tank / wiping pad.
Combo brush
Another similarity with the older L10 Pro is the combo brush design.
I don’t see any noticeable difference between the Z10 Pro and L10 Pro brushes, as they both use the same bristle and rubber blade combo.
The navigation system is a solid suit to the Z10 Pro with its top-mounted LIDAR (or laser) sensor, which is my preference.
laser sensors Provides better accuracyAnd their lack of reliance on light means You can turn it on with the lights off.
she has Similar navigation pattern as other LIDAR-based robots Like Roborock, he cleans the edges before sweeping the middle in straight lines.
The forward-facing 3D laser sensor adds another wrinkle to avoid obstructions not found on other brands.
I’ve tested it extensively, and it’s much better than a camera sensor that has fewer blind spots.
I avoided many obstacles such as fake stools, coiled wires, small toys, and shoes. But, as I said earlier, there is a limit to the size it can evade.
I still wouldn’t recommend leaving things scattered around because it hampers the robot and reduces its efficiency.
Efficiency and coverage
One part of the navigation tests I do is efficiency, where I record the amount of time it takes a robot to complete a two-track run within a small room.
The Dreame Z10 Pro finished running in about 16 minutes, one of the fastest times, and better than Roomba S9+ and I6 +and on par with Roborock S7.
Unfortunately, it didn’t do so well in the coverage test, as I scattered Quaker oats around the room to check how much it was picking up.
This is a standard test that I will be doing for all robotic vacuums, and is a good measure of how well the brush is picking up debris.
He left a big sum after the first two passes. One of the reasons why it doesn’t work is because there are these rubber flaps in front of the main brush.
I’m not sure why Dreame would use this design because it obstructs the path of debris traveling into the brush.
Application Features
This alternative is compatible with the Xiaomi Home app with some great features. We will pass them one by one.
1. Live Map
One of the features I love with LIDAR-based bots is the live map. It shows users, in real time, the location of the bot on the map, which is useful if the bot is lost or stuck.
2. Playing maps and mapping
Dreame Z10 app can save files Up to three map levels – More than the L10 Pro.
Users can add multiple invisible walls, restricted areas, and no mop areas on each level.
These are indispensable containment features that every homeowner will find useful in blocking restricted areas.
Another upgrade from the L10 Pro is Operations Mapping, where the robot goes in exploratory mode to map.
More efficient mapping operations Because the robot doesn’t have to go through every nook and cranny to create the map, taking full advantage of the laser sensor’s ability to shoot out 360-degree signals.
Since the engine is closed, the robot can do this Cover more area faster From a camera-based robot with the same feature.
Once the bot finishes running the mapping, it automatically adds the partitions, and based on what you’ve seen – it’s Very accurate with these sections.
If you are not satisfied, it is possible to delete the default partitions and set your own through the Map Management tab at the bottom left.
3. Containment areas
Another feature of the app that I love is the various containment options. For the Z10 Pro, there are three: Invisible Walls, Restricted Zones, and Restricted Zones.
The invisible wall acts as a virtual wall, preventing the robot from passing through a line on the map. It brings a lot of conveniences as there is no need to use a physical barrier.
Restricted areas and mop areas have similar functions, preventing the robot from reaching square or rectangular areas.
The difference is that mop-free areas prevent the robot from wiping the area in the mopping configuration, while mop-free areas prevent the robot from vacuuming.
4. Selective room cleaning
Customers can choose a specific room they want to clean through selective room cleaning. Using the Xiaomi Home app, tap the desired room or area.
Another option is to set the preferred power settings in each area to suit the task.
5. Clean areas
Users who want to focus on an area they want to clean can use the custom cleaning function.
Within cleaning an entire room, you can select a smaller rectangular or square area. It’s similar to in-place cleaning in old random navigation bots, but there is no need to move the bot to location.
Once the square is drawn on the app, the robot goes to the area, cleans it up, and returns to the base.
6. Automatic unloading settings
The Xiaomi app also offers several auto-discharge settings to adjust the frequency between one and three cleaning tasks.
You can also choose to turn off the feature and empty the trash manually.
However, it does not have quick access to the empty trash feature on the main interface, which I believe should be added in future updates.
5. Increase the carpet
The carpet boost setting is also available through the device settings tab. With this setting turned on, the robot increases suction when it detects carpet.
Provides a balance between power and uptime since this robot has enough suction power to clean hard floors even in standard mode.
6. Scheduling
A scheduling feature is available to automate the vacuuming process. Unlike the iRobot app with a gap of at least three hours, Xiaomi does not have these limitations, and you can schedule as many runs as needed.
This feature is usable with selective room cleaning, so it is possible to schedule runs in specific areas at preferred times to further automate the task.
Combined with its self-discharging capabilities, this robot manages to be truly autonomous.
How much power does the Dreame Z10 Pro have?
I use an anemometer to measure the airflow on the brush roller. Although it is not the best way to measure suction, it does provide a unified statistic for comparing different robot vacuums.
Due to the robot’s design, it is impossible to use a vacuum gauge to measure water lift, which is an industry standard (at least) for upright and center vacuums.
Below are the results of the Dreame Z10 Pro on all power settings.
- calm: 9.8 CFM
- Basic: 11.33 cubic feet per minute
- strong: 13.91 cubic feet per minute
- Turbo: 19.33 cubic feet per minute
The result of 19.CFM is at the top level among robotic vacuum cleaners and slightly better than the L10 Pro.
I’ve also tested this robot using the standard setup on hard floors, and it has enough to pick up things like dust and hair.
You can leave it at this setting for most cleaning tasks, except for heavy debris such as sand or pet litter.
cleaning performance
Next, we will take a look at how to clean the Dreame Z10 Pro for different types of debris. I’ve tested it on things like Quaker oats, coffee grounds, pet droppings, quinoa, sand, and hair.
Below are the total results from the tests.
- Total: 93.45%
- hardwood floors: 98.45%
- Sand on the hard floor: 97%
- carpet: 98.42%
- deep cleaning: 79.95%
Looking at the overall results, the Z10 Pro fared better than the L10 Pro, especially on carpet, where it got more.
One reason for the increase may be higher airflow and potential brush roll improvements.
Solid ground
- Quaker Oats: 99.4%
- Cafe floors: 99%
- Quinoa: 98.4%
- pet litter: 97%
The Z10 Pro was slightly better on hard floors, with Transfer rate of 98.45%.
It did well across the board, and one of the reasons it’s not above 99% is the fast spinning side brush and the lack of a third pass.
The side brush scattered bits of debris around, so the result was a little lower, but it’s not far from the best performing robotic vacuums.
sand on hard floor
Sandblasting is one of the most difficult things to clean, especially for a robot vacuum that has less power than a vertical or wand vacuum cleaner.
The Dreame Z10 Pro was decent, pick up rank 97%. Not a clean sweep, but it got most of it and is above average compared to other brands.
hair wrap test
I also tested this robot on how it resisted hair tangling, and it was decent, at least with five inches of strands.
- 5 inch hair: 83% inside the trash; 17% on the brush
- 7 inch hair: 28.5% inside the trash; 71.5 on the brush
However, it was below par on longer seven-inch strands, rising only 28.5%.
This robot can be used on short strands, but longer hair will curl up on the brush and hubs, which requires more care.
Edge cleaning
The circular frame hinders this robot from cleaning edges efficiently.
After running it twice, a large piece of debris was scattered, but a lot remained.
It is not as effective as a file Roomba S9+ or Ecovacs T8 with dual-sided brush system.
Carpet cleaning
Tests were conducted on low and medium pile carpet with the same debris group. Despite the slight bump with the airflow, the Z10 Pro picked up a higher percentage, especially with the built-in dirt.
Low stack results
- Quaker Oats: 98.2%
- Cafe floors: 95.8%
- Quinoa: 100%
- pet litter: 99%
Results on low pile carpets are slightly better than results on medium carpets. And based on my eye test, it worked for cleaner passes, worked best on clean quinoa and worse on finer coffee.
The latter is something that most robot vacuums struggle to clean.
However, these results are encouraging and are a step forward compared to the results of the older L10 Pro.
Mid-stack results
- Quaker Oats: 96.4%
- Cafe floors: 95.6%
- Quinoa: 100%
- pet litter: 99.4%
Although it was slightly worse on a medium pile rug, the drop isn’t that great. I had an above average score across the board with scores above 95%.
As with the low-stack test, it performed worse on ground coffee and better on cleaning quinoa.
Surprisingly, it did slightly better with heavier debris such as pet litter.
Deep cleaning tests
The biggest surprise to me when running these tests are the results on a mid-pile rug. I wasn’t expecting much because the L10 Pro was below average.
I picked up with an average of 79.95%which is 10% better than the L10 Pro (64.75%).
Not as good as airflow monsters – the Roomba 980 and S9 +but it is close to the likes Roborock S4 MaxAnd S6 Purebetter than Ecofax T8.
Scan results
Electronic water tanks have become the standard and the Z10 Pro has a capacity of 150ml. Unlike the Roborock S7 with a vibration element, this robot doesn’t just pull a wet pad.
I splashed red wine stains to test how good the mops were and it was decent.
It cleaned most red wine stains but needed a second run to remove the residue.
Definitely better than a robot that uses a gravity tank, but it’s less than the likes of the Roborock S5 Max and Yeedi Vac Station which have less residue.
I recommend this on lighter stains, but it’s not something that will take the place of a dedicated scanning tool.
How noisy is the Dreame Z10 Pro?
The Dreame Z10 Pro isn’t very noisy outside of the Turbo option, at 60-65dB. But it rises using the highest setting at 75.5 dB.
Here are the full results after testing the sound meter.
- calm: 60.3 dB
- Basic: 63.6 dB
- strong: 65 dB
- Turbo: 75.5 dB
Fortunately, consumers don’t need to use the turbo setting exclusively as a standard, or the powerful settings have enough oomph to clean hard floors.
Users can select these lower modes and then turn on the carpet boost setting to balance uptime and cleaning performance.
How long does the Dreame Z10 Pro run?
At its lowest setting, it will run for up to 2.5 hours or 150 minutes. Not as tall as the Roborock S7, but enough to clean a medium to a large house.
Efficient navigation is triggered here because it doesn’t take long to finish the cleanup job, which increases uptime.
What comes in the box?
- Android Dreame Z10 Pro
- Automatically empty berth (with one bag installed)
- 1 extra bag
- one side brush
- Manual and quick start guide
Availability of spare parts
Since Dreame is brand new, don’t expect too much with parts availability. You can buy spare parts Like a filter or brushes From the Dreame’s Amazon storefront, but that’s it. Third party manufacturers will not sell their components because they are not as popular as other brands like Roomba.
maintenance
Maintenance is an important part of robot vacuum ownership and should dictate how long it lasts. If you’re spending that amount, it pays to learn the ins and outs of caring for it. I’ll quickly go over the different parts you’ll need to check, clean, and replace.
- Basic brush roll: This part gets the most abuse. Do a visual inspection once a week to check for any hair or debris accumulating on the cylinder and hubs.
- Side brush: Another part where hair accumulates is the side brush. Examine the arms and base for hair wrap.
- Dustbin and filter: I’m not a big fan of the Z10 Pro’s auto-emptying design, so you’ll have to check the robot’s dustbin for any buildup inside and on the brush entry for any dirt sticking to it. Press the filter against a hard surface to dislodge any debris and extend its service life. Replace it every two or three months.
- Wheels: Clean the side wheels and wheels to remove dirt stuck to the surface.
- Drop sensors: turn the robot over, then clear the drop sensors to prevent an error code from being released, which prevents the robot from working.
- Automatic unloading dock: Keep the ports clear of obstructions and replace the bag when it is full. It appears to have a sensor that notifies users if it is full. But do a visual inspection to confirm and replace when needed.
Product Spec.
| Model | Dreame Z10 Pro |
|---|---|
| Manufacturer | DreameTech |
| Battery | 5,200 mAh Li-ion |
| Run time | Up to 150 mins. |
| Auto empty capacity | 4-liters |
| Water Tank Capacity | 150 ml. |
| Dirt Capacity (dry) | 400 ml. |
| Diameter | 13.8 inches |
| Height | 3..8 inches |
| Smart Navigation | Yes |
| Recharge and Resume | Yes |
| HEPA Filtration | Yes |
| Side Brush | Yes |
| Extra Filter | No |
| Manufactured In | China |
| Warranty | 1 year |
| Price | Check Price |
Where can I buy Dreame Z10 Pro?
You can buy this self vacuuming robot vacuum from online stores like Amazon. Check the link below for more details.
Disclaimer: I’ll earn a commission if you buy through the link above, but at no additional cost to you, so it’s a win for us!
Is the Dreame Z10 Pro worth it?
Depending on the introductory price, the Dreame Z10 Pro could be a good and less expensive option than the Roomba I6.
I’m pleasantly surprised at how well it picks up since its predecessor (L10 Pro) didn’t do well, making this a convenient option for those looking for a self-emptying robotic vacuum.
The front 3D sensor adds an element of obstacle avoidance that you won’t see on most other brands, so you can leave the shoes in place, and you won’t push them forward.
Unfortunately, the self-discharge design may need some improvement. I’m not a big fan of the port design as it doesn’t have a good seal and can be opened easily.
5 Reasons to Get Dreame Z10 Pro
- Improved cleaning performance: One surprise for me was the much improved performance of the Z10 Pro, especially on the carpet.
- obstacle avoidance: The 3D front laser sensor is better than the front camera sensor at detecting and avoiding objects with fewer blind spots.
- Good at cleaning compact sand: The higher airflow of this robot makes it possible to clean the embedded sand better than the Dreame L10 Pro.
- empty itself: This robot comes with an auto emptying feature that empties the robot’s trash automatically.
- Cheaper than Roomba I6 / I7: Dreame offers a more affordable option over the more expensive Roomba I6 and I7 with similar cleaning performance.
Verdict: Improved cleaning performance, excellent obstacle avoidance, below average automatic emptying system
When I got this robot, I honestly didn’t expect much from it. But the results of the cleaning performance were a pleasant surprise.
Even with only a slight increase in airflow, this variant cleaned much better than the Dreame L10 Pro, especially on carpet and much better in built-in sand.
Based on cleaning tests, this variant is close to the Roomba I6 + and slightly better than the I3 +, with better application and portability.
If you don’t mind trying a new brand at a lower cost, give this robot vacuum cleaner a look.
Mid-priced self-discharging option with excellent obstacle avoidance capabilities
- Mobility – 95%
- Surface cleaning – 97.96%
- deep cleaning – 79.95%
- Quality – 94%
- Design – 94%
- Values - 95%
- TOTAL AVERAGE: 93%
summary
The latest product from Dreame Tech, the Z10 Pro is a compelling mid-priced option with an automatically empty dock. One aspect that separates it from most other options is the front 3D sensors that give it excellent obstacle avoidance capabilities. Even if you don’t move that row, shoe, or scale in one corner, this robot will still avoid those things. There were some hiccups during the testing process, such as a sub-par score with test coverage. I wouldn’t recommend this to pet owners as the port location is not ideal for efficiently blowing large amounts of hair. However, this is a good alternative for non-pet owners who are looking for an empty and efficient robot vacuum cleaner without breaking the bank.